Full screen on/off
Industrial Electrician, 442A , NOC 7242
Introduction
1. 112 Must-know Concepts to Master for the Industrial Electrician Red Seal License Exam
2. 1. DESCRIPTION OF THE INDUSTRIAL ELECTRICIAN TRADE
3. 2. ESSENTIAL SKILLS SUMMARY
4. 3. PIE CHART OF RED SEAL EXAMINATION WEIGHTINGS
5. 4. INDUSTRIAL ELECTRICIAN TASK MATRIX
6. 5. INDUSTRY EXPECTED PERFORMANCE
7. 6. MAJOR WORK ACTIVITY A Performs common occupational skills
8. 7. A-1.01 Maintains safe work environment
9. 8. A-1.02 Uses personal protective equipment (PPE) and safety equipment
10. 9. A-1.03 Performs lock-out and tag-out procedures
11. 10. A-1.04 Identifies environmental conditions
12. 11. TASK A-2 Uses tools and equipment
13. 12. A-2.01 Uses common and specialty tools and equipment
14. 13. A-2.02 Uses access equipment
15. 14. A-2.03 Uses rigging, hoisting and lifting equipment
16. 15. TASK A-3 Organizes work
17. 16. A-3.01 Interprets plans, drawings and specifications
18. 17. A-3.02 Identifies hazardous locations
19. 18. A-3.03 Organizes materials and supplies
20. 19. A-3.04 Plans project tasks and procedures
21. 20. A-3.05 Prepares worksite
22. 21. A-3.06 Finalizes required documentation
23. 22. TASK A-4 Fabricates and installs support components
24. 23. A-4.01 Fabricates support structures
25. 24. A-4.02 Installs brackets, hangers and fasteners
26. 25. A-4.03 Installs seismic restraint systems
27. 26. TASK A-5 Commissions and decommissions electrical systems
28. 27. A-5.01 Commissions systems
29. 28. A-5.02 Performs shutdown and startup procedures
30. 29. A-5.03 Decommissions systems
31. 30. TASK A-6 Uses communication and mentoring techniques
32. 31. A-6.01 Uses communication techniques
33. 32. A-6.02 Uses mentoring techniques
34. 33. MAJOR WORK ACTIVITY B Installs and maintains generating, distribution and service systems
35. 34. B-7.01 Installs single-phase consumer/supply services and metering equipment
36. 35. B-7.02 Maintains single-phase consumer/supply services and metering equipment
37. 36. B-7.03 Installs three-phase consumer/supply services and metering equipment
38. 37. B-7.04 Maintains three-phase consumer/supply services and metering equipment
39. 38. TASK B-8 Installs and maintains protection devices
40. 39. B-8.01 Installs overcurrent protection devices
41. 40. B-8.02 Maintains overcurrent protection devices
42. 41. B-8.03 Installs ground fault, arc fault and surge protection devices
43. 42. B-8.04 Maintains ground fault, arc fault and surge protection devices
44. 43. B-8.05 Installs under and over voltage protection devices
45. 44. B-8.06 Maintains under and over voltage protection devices
46. 45. TASK B-9 Installs and maintains low voltage distribution systems
47. 46. B-9.01 Installs low voltage distribution equipment
48. 47. B-9.02 Maintains low voltage distribution equipment SKILLS
49. 48. TASK B-10 Installs and maintains power conditioning systems
50. 49. B-10.01 Installs power conditioning systems
51. 50. B-10.02 Maintains power conditioning systems
52. 51. TASK B-11 Installs and maintains bonding, grounding and ground fault detection systems
53. 52. B-11.01 Installs grounding systems
54. 53. B-11.02 Maintains grounding systems
55. 54. B-11.03 Installs bonding systems
56. 55. B-11.04 Maintains bonding systems
57. 56. B-11.05 Installs ground fault detection systems
58. 57. B-11.06 Maintains ground fault detection systems
59. 58. TASK B-12 Installs and maintains power generating systems
60. 59. B-12.01 Installs alternating current (AC) generating systems
61. 60. B-12.02 Maintains AC generating systems
62. 61. B-12.03 Installs direct current (DC) generating systems
63. 62. B-12.04 Maintains DC generating systems
64. 63. TASK B-13 Installs and maintains renewable energy generating and storage systems
65. 64. B-13.01 Installs renewable energy generating and storage systems
66. 65. B-13.02 Maintains renewable energy generating and storage systems
67. 66. TASK B-14 Installs and maintains high voltage systems
68. 67. B-14.01 Installs high voltage systems
69. 68. B-14.02 Maintains high voltage systems
70. 69. TASK B-15 Installs and maintains transformers
71. 70. B-15.01 Installs extra-low voltage transformers
72. 71. B-15.02 Maintains extra-low voltage transformers
73. 72. B-15.03 Installs low voltage single-phase transformers
74. 73. B-15.04 Maintains low voltage single-phase transformers
75. 74. B-15.05 Installs low voltage three-phase transformers
76. 75. B-15.06 Maintains low voltage three-phase transformers
77. 76. B-15.07 Installs high voltage transformers
78. 77. B-15.08 Maintains high voltage transformers
79. 78. MAJOR WORK ACTIVITY C Installs and maintains wiring systems
80. 79. C-16.01 Installs conductors and cables
81. 80. C-16.02 Maintains conductors and cables
82. 81. C-16.03 Installs conduit, tubing and fittings
83. 82. C-16.04 Installs raceways
84. 83. C-16.05 Installs boxes and enclosures
85. 84. C-16.06 Maintains conduit, tubing, fittings, raceways, boxes and enclosures
86. 85. TASK C-17 Installs and maintains branch circuitry and devices
87. 86. C-17.01 Installs luminaires
88. 87. C-17.02 Maintains luminaires
89. 88. C-17.03 Installs wiring devices
90. 89. C-17.04 Maintains wiring devices
91. 90. TASK C-18 Installs and maintains heating, ventilation and air-conditioning (HVAC) electrical components
92. 91. C-18.01 Connects power to HVAC systems and associated equipment
93. 92. C-18.02 Installs HVAC controls
94. 93. C-18.03 Maintains HVAC electrical components
95. 94. TASK C-19 Installs and maintains electric heating systems and controls
96. 95. C-19.01 Installs electric heating systems and controls
97. 96. C-19.02 Maintains electric heating systems and controls
98. 97. TASK C-20 Installs and maintains exit and emergency lighting systems
99. 98. C-20.01 Installs exit and emergency lighting systems
100. 99. C-20.02 Maintains exit and emergency lighting systems
101. 100. TASK C-21 Installs and maintains cathodic protection systems
102. 101. C-21.01 Installs cathodic protection systems
103. 102. C-21.02 Maintains cathodic protection systems
104. 103. MAJOR WORK ACTIVITY D Installs and maintains rotating and non-rotating equipment and control systems
105. 104. D-22.01 Installs motor starters
106. 105. D-22.02 Maintains motor starters
107. 106. D-22.03 Installs motor control devices
108. 107. D-22.04 Maintains motor control devices
109. 108. TASK D-23 Installs and maintains drives
110. 109. D-23.01 Installs AC drives
111. 110. D-23.02 Maintains AC drives
112. 111. D-23.03 Installs DC drives
113. 112. D-23.04 Maintains DC drives
114. 113. TASK D-24 Installs and maintains non-rotating equipment and associated controls
115. 114. D-24.01 Installs non-rotating equipment and associated controls
116. 115. D-24.02 Maintains non-rotating equipment and associated controls
117. 116. TASK D-25 Installs and maintains motors
118. 117. D-25.01 Installs single-phase motors
119. 118. D-25.02 Maintains single-phase motors
120. 119. D-25.03 Installs three-phase motors
121. 120. D-25.04 Maintains three-phase motors
122. 121. D-25.05 Installs DC motors
123. 122. D-25.06 Maintains DC motors
124. 123. MAJOR WORK ACTIVITY E Installs and maintains signalling and communication systems
125. 124. E-26.01 Installs fire alarm systems
126. 125. E-26.02 Maintains fire alarm systems
127. 126. E-26.03 Installs security and surveillance systems
128. 127. E-26.04 Maintains security and surveillance systems
129. 128. TASK E-27 Installs and maintains communication systems
130. 129. E-27.01 Installs communication systems
131. 130. E-27.02 Maintains communication systems
132. 131. TASK E-28 Installs and maintains building automation systems
133. 132. E-28.01 Installs building automation systems
134. 133. E-28.02 Maintains building automation systems
135. 134. MAJOR WORK ACTIVITY F Installs and maintains process control systems
136. 135. F-29.01 Installs discrete input/output (I/O) devices
137. 136. F-29.02 Maintains discrete input/output (I/O) devices
138. 137. F-29.03 Installs analog input/output (I/O) devices
139. 138. F-29.04 Maintains analog input/output (I/O) devices
140. 139. TASK F-30 Installs, programs and maintains automated control systems
141. 140. F-30.01 Installs automated control systems
142. 141. F-30.02 Maintains automated control systems
143. 142. F-30.03 Programs automated control systems
144. 143. F-30.04 Optimizes system performance
145. 144. TASK F-31 Installs and maintains pneumatic and hydraulic control systems
146. 145. F-31.01 Installs pneumatic control systems
147. 146. F-31.02 Maintains pneumatic control systems
148. 147. F-31.03 Installs hydraulic control systems
149. 148. F-31.04 Maintains hydraulic control systems
150. 149. APPENDIX A ACRONYMS
151. 150. APPENDIX B TOOLS AND EQUIPMENT
152. 151. APPENDIX C GLOSSARY
Finish
Industrial Electrician, 442A , NOC 7242
Trades License Exam Preparation Course
Access to The Pre-Exam Course